|
I dont get any display on the oscope for steps 2 or 3. Ive basically given up trying to inject the signal at the mixer grid. If you use the antenna terminals as the injection point, you set the tuner to channel 4 and use channel 4 pix carrier to inject into the rf modulator.. Ive tried it that was, and varied the bias on the tuner agc line and still get nothing.
Yes, my tv works fine if i connect it back up to the crt with the HV running.
I also tried using the Sencore Sm 158 speed aliner with its supplies probes and still get nothing. So its has to be my set up.
|