View Single Post
  #8  
Old 11-10-2020, 04:05 PM
reeferman's Avatar
reeferman reeferman is offline
VideoKarma Member
 
Join Date: Jun 2004
Location: St. Louis
Posts: 593
After seeing the pictures I’ll probably have nightmares.
I wish you nothing but the best with this set

I have worked on more of these than I’ll ever admit. I always thought the boss was trying to get me to quit when I had to work on one. We had a large Motorola population thanks to an EJ Korvette department store.

Motorola had a problem toasting the demod tube sockets to a crisp in their hand wired chassis. Changing a tube socket in a Moto was memorable experience. Changing one/both demod sockets was unforgettable. No room!

I would solder leads on the replacement socket’s pins. I would then snake leads through the existing socket pin holes and solder to the socket tabs. NOT a pretty picture! If the socket was so bad that only the metal pin holes/tabs remained, end of story. I wasn’t proud of the repair, but it was revenue for the shop and the customer was happy. Fortunately, customers having these Motorolas repaired weren’t picky about picture quality.

I’ll withhold comments on the 23EGP.

Phil

Last edited by reeferman; 11-10-2020 at 04:08 PM.
Reply With Quote