Quote:
Originally Posted by old_tv_nut
Typical luma DC coupling was about 85%, but could vary with contrast setting depending on the circuit design. So, with correct brightness control (black level cutoff) setting for an average picture, a nearly all white picture would clip shadows at 7.5% of the video range, and a nearly all black picture would add 7.5% fog to the blacks.
|
I went off to study later chassis implementation. The ctc7 thru ctc11 bridged thru the brightness control some of the DC across the 0.1uF coupling capacitor. The ctc20 seemed to go a bit further and the brightness control top leg preceded the 1st video stage cathode follower. That means the black level is being sourced at the detector to provide a higher percentage of DC level with less likelihood of voltage drift.
The CTC4, on the other hand looks to have the highest percentage of DC coupling straight thru.
So it looks as if the CTC5 of all the RCA color roundies and perhaps of any RCA color set has the worst DC restoration. But it looks like can be relatively easily remedied.