Quote:
Originally Posted by Penthode
Anyhow I want to find out why the shunt regulator has too easy a life: you disconnect the 6BK4 and the high voltage remains at 21kV! And the tracking problem probably due to my CTC5 incompetence! Even the manual is rather arbitrary when it comes to trying to track with the screen, background and gain adjustments. It is so much easier with the Zenith color set!
|
If you compare the HV regulator circuits in the CTC5 and CTC7 (free Sam's for both are on the ETF Color sets -> technical documentation page) the CTC5 and CTC7 circuits are identical except that a fixed resistor on the (non-adjustable) CTC5 is replaced by a potentiometer and series resistor on the CTC7...on the second CTC5 I did I upgraded the HV circuit to the adjustible CTC7 circuit.
I wish I could remember a few months ago when I did my second CTC5 I had a couple of issues setting grayscale tracking. One was related to there being 2 versions of the super chassis the one I had having a electromagnetic blue lateral and no blue gun level pot and the Sam's set having a gun level pot and Permanent magnet blue lateral and writing their proceedure assuming you had a blue gun level pot (I forget if the gun level was screen or drive).
The other issue I had was the proceedure called out a voltage for IIRC the red gun and I had some circuit fault I had to fix to get there. I have some vague recall of AGC issues that may have been related.
All the 21AXP22 RCAs had circuit designs that drifted grayscale some with extreme adjustment of brightness and contrast controls. The key is to get it reasonably good in the range you are going to watch it at.