Quote:
Originally Posted by Penthode
...
Anyhow I want to find out why the shunt regulator has too easy a life: you disconnect the 6BK4 and the high voltage remains at 21kV!...
|
The HV circuit in the CTC-5 Super chassis is not capable of much in the first place. I suspect that 21 kV unregulated was normal. I also suspect the Deluxe chassis was capable of much more. Maybe someone who has worked on both can comment.
And yes, the tracking arrangement in the Super chassis is a pain. Part of of the problem is that offsets in the demodulators can affect it, hence the background controls on the CRT G1's.
The Deluxe chassis and all following RCAs using XZ demodulation plus following matrix/amplifier tubes for R-Y, G-Y and B-Y amplification are much more stable, because the three output stages also perform a DC-restorer function. The negative horizontal blanking pulse applied to the three interconnected cathodes causes the tubes to draw grid current, thus DC-restoring the X and Z signals at the input coupling caps and stabilizing the G1 voltages. There can still be some difference between the amplifier sections, but nowhere near as bad as in the Super chassis B-Y and G-Y demods. I have never, ever seen anywhere an explanation of the DC restorer function in the XZ demod system. I think RCA just didn't want repairmen worrying their poor little heads over understanding something that had no effect on repair diagnosis. If the tubes were bad, it would be obvious and fixed by replacing them. And if a component failed causing the blanking pulse to be lost, there would be retrace line problems, so even though it would cause loss of DC restoration, that is not the symptom per se that you would use for diagnosis.