View Single Post
  #20  
Old 09-20-2020, 10:49 PM
Yamamaya42's Avatar
Yamamaya42 Yamamaya42 is offline
VideoKarma Member
 
Join Date: Nov 2018
Location: Round Rock TX
Posts: 3,253
This is just pure speculation at this point, as I have only had the set on for about 30 min to evaluate it, and not even pulled the chassis yet.

I have no idea why they chose not to put the CRT bias in like RCA does.
https://i.imgur.com/6XruNV1.jpg
it's hard wired to the lowest setting via the 47k resistor R170, that is the area that in RCA sets that the bias switch is, that has dif resistors to change the bias, if R170 has gone up in value, it would no doubt cause a dim screen even with a good CRT.

once I start working on this, I will most likely replace that with a 50K 2 watt Pot, that will give me a way to adjust CRT bias on this thing.
__________________
=^-^=
Yasashii yoru ni hitori utau uta. Asu wa kimi to utaou. Yume no tsubasa ni notte.
いとおしい人のために
Reply With Quote
Audiokarma