View Single Post
  #58  
Old 09-02-2020, 01:14 PM
Tom9589 Tom9589 is offline
VideoKarma Member
 
Join Date: Jan 2013
Location: Stone Mountain, GA
Posts: 492
What would be really helpful is to use a 1077 B&K TV Analyst (or equivalent) and inject an IF signal directly after the tuner. Note the stability of the picture and the 95V bus reading. That would tell you whether the problem is in the tuner or in the IF section of the set. A problem in the AGC can also cause a TV to shut down as you have described.

BAnderson is right. These ceramic caps rarely fail. They are typically used for bypass and therefore their value is not critical. No IF alignment should be required after you replace them.

Last edited by Tom9589; 09-02-2020 at 01:32 PM.
Reply With Quote