View Single Post
  #175  
Old 08-03-2020, 04:47 PM
BandDirector
Guest
 
Posts: n/a
I've been practicing removing boards from my backup chassis. I have learned that I am NOT a fan of clipping and resoldering caps and resistors just to test them. If that isn't best practice, too bad; this project needs to wrap up. I have every confidence that what I am doing by checking each object is a much safer, time friendly (I'm an unemployed teacher with plenty of time!) and I feel that basic step by step is simply the way to go. It will make testing poorly functioning components much easier.

I have a full set of back-up wiring, a separate chassis, and a duplicate of all parts minus a functioning main transformer. This is what I have learned:

1) Slow down and triple and quadruple check each action
2) Study the schematic and check whether there is a misprint (thanks, gents)
3) Refer to the old (chassis A) boards, someone did a decent repair job replacing 90% of the paper capacitors
4) Don't be bothered by placing and testing this chassis (chassis B, the replacement bought from 'Sonny' aka Radiolaguy that happened to have this exact 'Norman' RCA 21-D-8628 model) back in the set.
5) Any issue is starting to make some sense with everyone's help! Not to mention that excellent book link posted above.
Attached Images
File Type: jpg 20200803_153829.jpg (101.2 KB, 13 views)
File Type: jpg 20200803_153836.jpg (98.3 KB, 14 views)
Reply With Quote
Audiokarma