Quote:
Originally Posted by jr_tech
I see 2 pictures... looks like the vertical is running at half frequency.
jr
|
+1
Double check the values of the vertical stage film caps you changed and change any resistor that measures outside of its marked tolerance.
The cathode lytic in the vertical of most sets is a 25-100V 80-300uF lytic. Are you good enough at reading a schematic to differentiate the symbols for heater, cathode, grid, and plate? If so look at the vertical tube that drives the vertical output transformer and identify it's cathode and look for a lytic connected to the cathode.
The half frequency issue may be the only problem but if the foldover on the bottom persists after fixing the frequency issue check that lytic first.