Quote:
Originally Posted by BandDirector
Nope, around 225 ohms. So I guess a bad connection to the bell, and bad connection to the chassis/ground?
|
The Dag coating itself will have resistance across itself, but from the chassis to the wire that contacts the Dag should be very low resistance. There's got to be a wire or sometimes a length of foil that makes that connection between the CRT mounting hardware and the chassis. I would think when you swapped chassis' that you may have run across it.
Quote:
Originally Posted by BandDirector
The image will not fill the screen, but it will get close, leaves about an inch gap at the bottom.
|
And you still have the constant flicker?