View Single Post
  #102  
Old 07-18-2020, 01:59 PM
BandDirector
Guest
 
Posts: n/a
Quote:
Originally Posted by Kevin Kuehn View Post
By half do you mean a 1/2 ohm, or 225 ohms? If 1/2 ohm you have a reasonable connection going to ground and you can cross that off as a problem.
Nope, around 225 ohms. So I guess a bad connection to the bell, and bad connection to the chassis/ground?

The image will not fill the screen, but it will get close, leaves about an inch gap at the bottom.

Last edited by BandDirector; 07-18-2020 at 02:14 PM.
Reply With Quote