View Single Post
  #94  
Old 07-17-2020, 10:16 PM
Kevin Kuehn's Avatar
Kevin Kuehn Kevin Kuehn is offline
Workin' Late Again
 
Join Date: Jan 2011
Location: WI
Posts: 3,976
I drew a red arrow pointing to what "I think" is the dag ground contact wire that likely should have a tensioning spring pulling it taunt against the conductive coating. That wire should have some means of connecting to the chassis so that the outside coating is at chassis ground. If it's not grounded you'll have all sorts of bizarre artifacts because of the noise being radiated from the high voltage supply into the other circuits.

Reply With Quote