View Single Post
  #14  
Old 07-09-2020, 06:31 PM
Dave Drez Dave Drez is offline
VideoKarma Member
 
Join Date: Jun 2020
Posts: 29
Thanks very much for the thoughts! I do have the schematic so I'll go through all of them and check. I see that there is a Zenith V.D.R. off of the plate of the vertical output tube. I have a newer style MOV I can replace with... Not sure how to read a VDR otherwise.

The replacement transformer is for sure the correct part number... Zenith 95-2470 is directly replaced by the Thordarson 26S60. All of the wire colors appear to be the same except one of them. It was pretty easy to double check the windings of old old one (ohm meter) with the new one in order to confirm the hook-up. I checked it a number of time as I proceeded. Having said that, it's possible I made a mistake but I don't think it would work this way if I did...

Thanks John- I'll report back!

Dave
Reply With Quote