Quote:
Originally Posted by Notimetolooz
That would be a way to do it. You also would become more acquainted with the circuits. Sort of an aid in learning.
However, capacitors as old as in this TV have a very high probability of being bad, not every one but most. Some bad parts cause big problems, some just cause lack of best performance. Some might be OK for the moment but soon fail. You can't tell unless you completely test each one, that takes a lot of time and effort. You really need to unsolder at least one lead to test a capacitor. You should test for capacitance and leakage at near rated voltage. The other approach is to replace all the electrolytic and "paper" internal construction (some types of paper caps have plastic cases) capacitors. Resistors are a bit more reliable and easier to test.
|
Really any cap that old should be considered shot even if it tests good. Case in point (on newer sets known for having better capacitors) I checked every lytic in my 1962 Zenith 29JC20 color set and over 2 months of regular service it blew a an original section I left in every week or two....till I eventually got pissed and changed all the lytics. Back when I was a poor college student and didn't get believe in online parts vendors I bought a NOS 3KV .001 tubular ceramic cap that the seller claimed was a film dielectric to replace the original 2KV .001 paper dielectric tubular ceramic in my CTC15 clone....it shorted in a few months and took out other stuff too.
Original caps in 50s sets like that should never be trusted and even the better 60s stuff can still crap out.