View Single Post
  #7  
Old 05-10-2020, 10:02 PM
vortalexfan vortalexfan is offline
VideoKarma Member
 
Join Date: Sep 2018
Location: Northern Indiana
Posts: 1,992
Quote:
Originally Posted by maxhifi View Post
Can't you use a dual banana to bnc adapter? That's how I get signal in/out of my tube type test gear. Is the banana spacing non standard?
Yes, spacing is not standard, the ground connection is on one side of the signal generator and the RF Hi output banana jack is on the opposite side of the signal generator that the ground connection is.

Take a look at the picture of the front panel of this unit I posted above at the top of this thread, and you'll see what I mean about the spacing of the RF Hi output banana plug and the banana plug ground connection.
Reply With Quote