|
I don't have an image. It would be hard to see without a jewlers loupe or microscope. Most decks have 2-4 heads mounted on the bottom edge of the drum rotor. Those heads are typically thinner than a mechanical pencil lead and less than 1/16" from leading edge to trailing edge with a 19micron gap in the center and they just barely protrude from the drum. To find a head look for fine dashes on the bottom edge of the rotor, or put a piece of paper over the gap put your finger over the gap and spin the drum till you feel something tiny bump the paper up under your finger.
I've been enjoying working from home, but I miss restaurants and the outdoors/driving .
|