View Single Post
  #3  
Old 04-02-2020, 10:19 AM
Kevin Kuehn's Avatar
Kevin Kuehn Kevin Kuehn is offline
Workin' Late Again
 
Join Date: Jan 2011
Location: WI
Posts: 3,976
Quote:
Originally Posted by Electronic M View Post

It might be a good idea to find a 5 tube AM radio and make that your first project. The average monochrome TV is 5x as complex as an AM radio but uses similar parts so if you make a mistake Tracing it down from the schematic is much less difficult.

Phill's old radios on the internet has a lot of good beginner info and detailed write ups with pictures of TV and radio restorations he has done.
Not my intention to rain on your parade, but I highly suggest you heed the above advice and find yourself a transformer powered tube radio so you can learn the basics of electronics on a much less complicated set. I went back and read your introductory post, and IMO having some experience with antique and vintage telephones, cameras, and a few Edison cylinder phonographs are hardly credentials for the project you've undertaken. I understand the temptation to dive right in, but electronics is truly one of those fields where if you don't learn first, your basics, you'll forever be walking in the dark. Up until early computers, televisions were still considered one of the most complex electronic systems in existence. As far as discrete circuitry goes, they're still very high on that list.

Last edited by Kevin Kuehn; 04-02-2020 at 10:23 AM.
Reply With Quote