Quote:
Originally Posted by BandDirector
That is what I was thinking, I just don't know how you all can figure out the other voltages when I only see 280 and 260.
|
There are only two voltages, the B+ supply of 281 and the filament supply. The filament winding is the brown and brown/black is 6.3vac and that won't vary.
The rest of the chassis voltages are based off the 281, which isn't really critical. Most old tube TVs show more B+ than when new because the AC line voltage is a few volts higher generally speaking than it was in the '50s. If your replacement transformer is a bit higher in B+, make sure you restuff your filters with higher voltage caps.
You just want to be sure the replacement transformer's filament winding can handle the current of the tubes in that RCA. More is good, less is bad.
Other than that you want to be sure the donor transformer is used in a 5U4 rectifier TV as opposed to a selenium or silicon rectifier chassis, so try to find a transformer that will put out about 280 -300 volts off the 5U4.
If you find a donor chassis, look at the schematic and it will give you a great idea it will work, or, if you're unsure, post the donor information here.
John