View Single Post
  #23  
Old 03-16-2020, 05:31 PM
BandDirector
Guest
 
Posts: n/a
Quote:
Originally Posted by old_coot88 View Post
99.999% certain it's shot. But just to be 100.00% certain, do this:

On the off chance there's a hard short on the heater (filament) rail, disconnect the brown & brown/black wires so they 'float' free.

On the off chance there's a hard short in the 5U4 socket, disconnect the red & red/green wires* from the socket so they float free. (pins 4 and 6 respectively.)

Apply power to the primary as before. If the xfmr still smokes, 100.00% it's shot.

*Careful. There's normally around 800 - 900 VAC between these two.

It has been disconnected completely for this last test, only power to red/blk and black. It's probably just shorted. Maybe I can I rewind the entire transformer.
Reply With Quote