View Single Post
  #10  
Old 03-16-2020, 04:52 PM
old_coot88 old_coot88 is offline
VideoKarma Member
 
Join Date: Sep 2009
Posts: 2,654
99.999% certain it's shot. But just to be 100.00% certain, do this:

On the off chance there's a hard short on the heater (filament) rail, disconnect the brown & brown/black wires so they 'float' free.

On the off chance there's a hard short in the 5U4 socket, disconnect the red & red/green wires* from the socket so they float free. (pins 4 and 6 respectively.)

Apply power to the primary as before. If the xfmr still smokes, 100.00% it's shot.

*Careful. There's normally around 800 - 900 VAC between these two.
Reply With Quote
Audiokarma