View Single Post
  #4  
Old 01-06-2020, 10:41 AM
maxhifi's Avatar
maxhifi maxhifi is offline
VideoKarma Member
 
Join Date: Dec 2010
Posts: 1,871
Quote:
Originally Posted by zeno View Post
Its the 2 on the forward board with the IF's. they have vieo, sync & AGC
IIRC. A fresh tube will fool you with a fix but soon gives problems
again. Easy to change with the right socket. Just dike them apart
& pull one pin at a time like teeth.
The two tubes in the red rectangle? The one which I changed twice, is V202, the symptom was loss of horizontal lock. I changed it first in 2014, and again in 2019. The tube I changed was a replacement RCA tube, which had been changed by an RCA service center some time in the 70s. The TV was very low hours when I got it. I should order a couple sockets to have on hand, I would never have suspected the socket itself could go bad. V202 seems to run quite hot, but since the set works properly I just sort of assumed that must be normal.
Attached Images
File Type: jpg ctc38.jpg (124.4 KB, 22 views)

Last edited by maxhifi; 01-06-2020 at 10:46 AM.
Reply With Quote