Thought it was one of these beasts. They used it in 19"sets also
and they were ball busters to carry. Weighed more than a Zenith.
I think the handle was some kind of sick joke....
Anyhows the most common thing with these was cold joints at the
vert module & on PW500. Some are hard to get to. Watch especially
plugs/sockets & the wire tie stakes. After that most likely the
bottom vert out & maybe some toasted resistors.
BTW there is a plastic tool on the chassis to help pry the boards out
if it were put back after any use.
73 Zeno

LFOD !