View Single Post
  #5  
Old 11-08-2019, 02:37 PM
Electronic M's Avatar
Electronic M Electronic M is offline
M is for Memory
 
Join Date: Jan 2011
Location: Pewaukee/Delafield Wi
Posts: 15,496
Quote:
Originally Posted by cj_reha View Post
It does appear to originate from the two glass rods visible in the photo - are those the same rods you're referring to? I am tempted to carefully take the tube out and put it in my 21" Zenith since the tubes seem to be virtually identical as far as voltages and the pinout go. Just not sure I want to chance disturbing the disintegrating yoke cover..
Quick and dirty way to do it would be to keep the tubes in both sets, place both sets back to back connect the socket and HV from the good chassis to your suspect tube, turn the brightness on your good chassis to minimum and power it up...if you get a tiny bright spot in the middle of the screen of the suspect tube then it is fine.

I did the above once when I was in a move and couldn't find my tester. It got the job done.
__________________
Tom C.

Zenith: The quality stays in EVEN after the name falls off!
What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4
Reply With Quote
Audiokarma