Quote:
Originally Posted by joe111671
Horizontal line. It actually did have a vertical white line on the right that would get wider as I turned the horiz hold control, but that went away after I got the picture adjusted. I'll go check the resistors later when I get home. Can they be tested in circuit?
All the lytics & paper caps are replaced with new. For the ones where the exact value wasn't available, I used the closest I could, and I believe all were within 10% of the original value. I remember seeing a youtube video by shango066 where he built a new integrator for an old Zenith. I'll have to go find it if all the resistors are ok.
|
If the line is horizontal it is probably not related to the horizontal stage and most likely a symptom of a vertical stage issue.... since all your caps are new check the resistors and tube in the vertical stage.