Quote:
Originally Posted by Electronic M
Your problem is in the horizontal oscillator. I assume you have changed all tubular paper dielectric caps, lytics and the couplates. Check resistors, and tube sockets (metal contacts break internally and go open), osc coil, solder joints, and B+ to the stage.
|
All caps, resistors, tube sockets, and couplates have been changed. I haven't checked the coil, but I don't think that would be the problem as the set did have high voltage before I took the board out to recap/change couplates/etc. I think I'll make my own thread about troubleshooting as I'd rather not derail this one.
