Quote:
Originally Posted by Electronic M
Is the capstan/head drum direct or belt drive, and is the pinch roller in good shape or slick and glazed/cracked? If the rubber is bad it might be moving to too slow for the color subcarrier to be on frequency....I've seen this in early CED players with bad platter drive belts.
There may be brakes on the tape drive pegs or in the tape preventing rewind.
One dirty trick for getting a bit more life out of your belts is to work them with CRC automotive belt dressing...It won't.work forever but if it helps you know to source new belts.
|
Both motors are belt drive, the larger drive motor in the back for the video head and the 7V in front for the tape turning. Will get you some pics later after work. Here's an older one for now. Pinch roller is mostly okay, has some dirt on it that im not sure how to clean without ruining the rubber, its still pretty flat with some grip.
The issue I was having was the the individual solenoids (rewind brake, pinch brake, take up reel brake etc) were not activating but they all
should be now. I'll have to examine the schematic and check the transistors and components on the rwd/ff area.
I'll look into that belt dressing. I know the tape counter belt is cracking (not a big deal just the TC) I just have to figure out the best way to measure these belts.