|
First thing that comes to mind is out of tolerance resistors in the pin amp circuit. Possibly something connected to the pincushion correction potentiometer. Do you have the schematic on this tv? I have noticed with some sets the pincushion correction potentiometer has more affect on the top than the bottom.
Does the its potentiometer adjust all the way to one side and acts like it's not enough or does it adjust to a certain point and then distort the pincushion altogether? Also looks like the yoke may be ever so slightly out of position from 90 degrees.
__________________
Honey, turn on the tv.. I'm cold!
Last edited by freakaftr8; 08-31-2019 at 05:44 PM.
|