Thread
:
1956 Sears 24" Suburbanite Combo
View Single Post
#
36
08-19-2019, 11:58 AM
Crist Rigott
VideoKarma Member
Join Date: Oct 2015
Location: Waxahachie, TX
Posts: 1,519
Yesterday I tackled the yoke cover. Just the side of the yoke cover was in bad shape. the top and bottom were ok. After removing the cover, I chipped off the side and left the bottom.
I then made a new side using 1/32 plywood. After fabricating the new side, I soaked the outside using CA glue as a base for the primer. I sanded it then shot some primer on it.
Once dry I installed the new side and used some 5 minute epoxy to glue it to the bottom. Once dry, I then painted it gloss black.
Crist Rigott
View Public Profile
Find all posts by Crist Rigott