Quote:
Originally Posted by Crist Rigott
Today I cleaned up the tuner switches and lubed the shaft. I cleaned and lubed the controls and wired them up.
The yoke cover will need to be redone. Not the complete cover but just the sides. I'll come up with a good method.
I powered it up and it worked right off the bat. I had to adjust the controls but it is working pretty good. Sound is very good too. I used my test CRT.
HV is good at 11.5Kv. I think I'll try another 1B3GT tube.
 |
Wow, the picture sure looks nice, you are sure making quick work on the chassis.