View Single Post
  #8  
Old 08-02-2019, 10:59 AM
vortalexfan vortalexfan is offline
VideoKarma Member
 
Join Date: Sep 2018
Location: Northern Indiana
Posts: 1,992
OK so now I seem to have developed a problem with my radio.

The oscillator circuit on my radio has become intermittent and it has a lot of background noise that wasn't there before and also it has an issue where two local stations that are both within a few miles of me are inconsistent with their reception.
The one station which its broadcast towers are less than 2 miles up the road from me is barely coming in, and a station that its broadcast towers which are about 7 miles up the road from me is blasting through loud and clear with no issues and the two stations are 70 kHz apart from each other on the radio dial, so I don't know what's going on.

Its acting almost like its got some weak tubes in it (it has two 24A tubes and a 35/51 Tube controlling the 2 IF and the oscillator circuits) The Oscillator is driven by one of the 24A tubes and I think one of those 24A tubes is either weak or bad but I have no way to check them as I don't have a tube tester that can check the older 4, 5, and 6 pin tubes, anyone have any ideas as to what could be wrong with my radio?

Another bizarre thing is that when I touch the grid cap on top of the 1st IF/Oscillator tube (a 24A Tube) the audio gets really loud and the reception improves greatly, but when I remove my finger from the 1st IF/Oscillator tube the audio gets quiet and the reception diminishes back to its previously degraded state.

Any help in this issue would be appreciated.

Thanks.

Last edited by vortalexfan; 12-15-2019 at 09:13 PM.
Reply With Quote