Quote:
Originally Posted by Popester
That’s a very nice cabinet. Would like to see pictures of the radio/phono part. Zeno makes a good point of trying to see if you can slowly wake up the electrolytics before you go so far as replacing them to only find out later you have a bad jug. Maybe you have a variac and slowly bring up.
|
If he already gave it a power up with full line voltage I don't see any point in doing a variac power up now.
Better move would be to check each DC power supply rail especially those that supply the horizontal system...if those are good check grid voltages on the horizontal output and report what they are relative to what they should be.
As far as a CRT tester goes a B&K 466 is a decent cheaper tester. Don't expect top shelf rejuvenation, but it can clear shorts and rejuvenate CRTs. I use one as my main rig, but want to get a CR-70 eventually.