View Single Post
  #13  
Old 02-05-2019, 01:34 PM
dieseljeep dieseljeep is offline
VideoKarma Member
 
Join Date: Jul 2010
Posts: 7,562
Quote:
Originally Posted by 17thielc View Post
Well I knew that it would, haven't seen a rectangular set without one. I like how parts availability is good due to the clone factor, I crossed the FLY and the chassis is very similar. I've cleaned the tuner and did what I could with it, it's just got a lot of play in it and likes to drift on signal, I swaped the tuner tubes, and checked all the obvious. It acts perfect with my subber on it. Didn't muntz make this PO7 sets, wouldn't I love one of those! Haven't seen a rectangular muntz thougj
I guess you think I'm just knocking the set comparing it with a Muntz.
Everyone thinks of the inexpensive B/W sets they were famous for. The color sets were the same as the other clones, using the same parts.
The tuner you are having grief with is the same version Magnavox used. For some reason those tuners always gave trouble. They seemed to use poor quality contact material.
Remove the tuner completely from the assembly, Remove the turret and check the stator contacts for tension, clean all the nasty old lube from the contacts. You can't always rely on tuner spray on a tuner like that.
Dave.
Reply With Quote