|
Yeah, it's a resistor with a small coil, probably about 20-30 turns wrapped around the center of it. I wasn't sure if the resistor value was critical, but it makes sense. As for the tuning, I wanted to make sure I didn't have to push one of the buttons to enable dial tuning. It didn't appear that way on the schematic, but I just wanted to make sure. A few of the other sets require a button to be pushed before you can use dial tuning.
I was able to get the IF sections working, but I can't seem to get a station. I can get a signal through the grid of the mixer, but any further back and I get nothing. Oscillator troubles prehaps?
__________________
"If it isn't broke, you aren't trying hard enough"
|