Here's the schematic for his Horizontal Oscillator.
First check the slug is moving within L500.
I was off a few uFds- the .0068uf (C507) swamping the coil, along with the .022uF (C508) would be my first swaps.
If you have a scope, you can follow the horizontal sync and oscillator waveforms right down the line - just make sure either the scope or the TV is on an isolation transformer - the hot chassis is a problem.
Doug Harmon posted about his TS-454 (same chassis electrically, laid out a bit differently) - his shows those putrid TRW burgundy caps that like to open. All the more reason I think you'll find a cap or two, possibly a resistor to be the culprit.
BTW, the same Horizontal oscillator is used in the TS914 and possibly other Motorola Color Chassis:
http://www.americanradiohistory.com/...-Page-0033.pdf