Thread: Tuner cleaner!
View Single Post
  #2  
Old 04-11-2017, 05:56 PM
Jon A.'s Avatar
Jon A. Jon A. is offline
Don't mess with Esther.
 
Join Date: Jun 2013
Location: Canada
Posts: 4,267
Quote:
Originally Posted by maxhifi View Post
I used to always buy radio shack contact cleaner, but the last can was garbage. Now use MG chemicals products.
I had a can of DeOxit D5 one time but didn't like it because it is so oily. I just got a big can of MG Chemicals Electrosolve and tried it on my Sanyo's VHF tuner, fixed it right up. I tried Radio Shack's trash on it a while ago which made no appreciable difference. Before the Electrosolve treatment I couldn't keep it locked on a signal.

Seems Electrosolve is basically a purer form of Nu-Trol; no lubricating agent I know of so it doesn't leave oily crap everywhere. It's far cheaper too, and my can was about half the price of what Amazon has. It's popular stuff, there were no big cans left on the shelf at Jentronics, someone had to go into the stockroom to get more.

I also sprayed the tuner and just about every chassis connection in My Electrohome just for good measure. Next up are my receiver and oscilloscope.

Last edited by Jon A.; 04-12-2017 at 12:35 AM.
Reply With Quote