Thread: Rca 621TS
View Single Post
  #154  
Old 04-10-2017, 09:37 PM
Crist Rigott Crist Rigott is offline
VideoKarma Member
 
Join Date: Oct 2015
Location: Waxahachie, TX
Posts: 1,519
I did a test strip on the new veneer I applied. I glued down some of the veneer I trimmed off on a piece of 3/4 ply. I then applied my grain filler and when it was dry, I sanded it off. I then divided it into 3 sections. The left section was stained with Mohawk "Brown Mahogany" #M545-2296, the middle section was stained with Minwax "Red Mahogany" #225, and the right most section was left bare.

I think the front face and top will get the Brown Mahogany because it is much lighter and I don't want that part of the cabinet too dark. I think it will match the original color pretty good.
The sides, seeing they are new veneer and pretty light so they will get the Minwax Red Mahogany. This will be a light application of stain to help control how dark the sides get.

When done staining, I'll look at a light application of some toner. We'll see. We have to get there before I decide what needs to be done.

Reply With Quote