View Single Post
  #26  
Old 02-10-2017, 12:21 PM
Findm-Keepm's Avatar
Findm-Keepm Findm-Keepm is offline
Followin' the Rules...
 
Join Date: Jun 2007
Posts: 2,857
Quote:
Originally Posted by DaveWM View Post
I looks like the orig system was to install the glass, use tape to seal the edges and then inject the liquid thru a small plastic port. Not sure how the glass was maintained a consistent distance off the CRT face.
4 identical spacers punched from a sheet of the same resin are placed at the corners - the safety glass is lowered into position, and then caulked with RTV102, then the resin is injected.

Patent 4656522, assigned to RCA has the details.
__________________
Brian
USN RET 22YRS (Avionics/Cal)
CET-Consumer Repair and Avionics ('88)
"Capacitor Cosmetologist since '79"

When fuses go to work, they quit!
Reply With Quote