Quote:
Originally Posted by MadMan
Also, guys, I was looking into fixing my cracked cellphone glass, and they use a uv-cured glue called LOCA to bond the glass to the lcd. Wouldn't it make sense to use that for this? It's not terribly expensive, it would bond the entire safety glass to the tube, be completely clear, and - I imagine - offer some implosion protection, as versus nearly none that the bead of silicone around the edge offers. |
I looks like the orig system was to install the glass, use tape to seal the edges and then inject the liquid thru a small plastic port. Not sure how the glass was maintained a consistent distance off the CRT face. I did a quick of a 20x20X.1 volume of 40cubed inch, about 22 oz. Not sure if its sold in bulk for that kind of delivery.