View Single Post
  #2  
Old 01-27-2017, 10:46 AM
Crist Rigott Crist Rigott is offline
VideoKarma Member
 
Join Date: Oct 2015
Location: Waxahachie, TX
Posts: 1,519
Quote:
Originally Posted by Crist Rigott View Post
When I jumper pin 1 to 3 & 9 contrast improves. Not a whole lot but an improvement.

When I short out R109 (with the jumper removed from pin 1 to 3 & 9), the contrast improves just barely.

Because the contrast pot is 5K, it doesn't take a lot of rotation to really change the contrast. BTW, with the contrast all the way up, I read 94 ohms from wiper to the pot end.
I jumpered a 3.3K resistor across the pot. This should give me 2K resistance and the rotation of the contrast pot is much better. I know it isn't linear, but very usable.
Reply With Quote