|
I have an identical model on a swivel base, chassis 16Z8C50. I love that style! Like Dave says, these are among Zeniths that used 6HS5-6HV5-6JD5 HV pulse regulators and the varistor causes issues. Doug Harland, a hero VK member to all owners of 67-72 Zenith sets, found a good replacement. If I find that thread Ill link it.
Due to Zeniths superior engineering and circuit design, individual electrolytic caps in lower working voltage ranges can cause odd symptoms, if open. Best to check all with an ESR tester when you have it on its side and bottom cover off. My experience is that the black electrolytics (25v and 50v) with red or yellow ends are usually NOT a problem but gray axial lead caps that look Japanese sometimes go open.
__________________
"When resistors increase in value, they're worthless"
-Dave G
Last edited by DavGoodlin; 01-25-2017 at 04:35 PM.
|