|
I have always believed that all the wide-ranging adjustments are there to compensate for tube drift and circuit drift. So your tube goes to 60%...so what...turn this control a bit further. As for the finish, I use Novus #2 plastic polish on any number of finishes. Plastic, varnish, lacquer. Give it a shot from a good hardware store.
Bakelite seems to have a finish on top of the compressed base that can erode and you are then looking at the base. No polish will fix that. Shoe polish may cover it a bit.
__________________
“Once you eliminate the impossible...whatever remains, no matter how improbable, must be the truth." Sherlock Holmes.
|