View Single Post
  #7  
Old 12-29-2016, 08:34 AM
Ed in Tx's Avatar
Ed in Tx Ed in Tx is offline
Zenith Walton My 1st TV
 
Join Date: Nov 2008
Location: DFW
Posts: 1,421
I used to fix those all the time. A few electrolytic caps, usually the smaller value in the primary and some in the secondary, maybe a new driver transistor, possibly replace a shorted zener that is there for overvoltage protection to the rest of the deck electronics. If it took a lightning or power surge then likely the driver transistor, fuse and the protection zener on the secondary side.

btw.. fuses are there for a reason! NEVER jump a fuse and just plug it in straight to the wall. If you must, use a 25 or 40W light bulb in series with the AC. Upon first power on after repairing the power supply I would always plug it in with a 40W bulb in series to make sure I got it all fixed.

If you do not have an isolation transformer, don't work on the power supply plugged in. Primary side is hot to AC.

Last edited by Ed in Tx; 12-29-2016 at 08:44 AM.
Reply With Quote