View Single Post
  #8  
Old 12-26-2016, 05:23 PM
retrogear's Avatar
retrogear retrogear is offline
VideoKarma Member
 
Join Date: Nov 2016
Posts: 21
I agree your scan is in focus. To me it appears to be a video IF amp stage faulty. Looking at the Sam's 88-9 there are 4 6AG5's V4-V7 video IF amps. Since you have buzz in the audio, audio IF signal is taken after the 2nd stage V5 so the fault would be in V4 or V5, either a bad tube or measure the plate voltage on pin 5 of those tubes should be approx. 100VDC. If that is missing, could be an open IF coil. It is normal to get buzz in the audio when a video IF amp is faulty. I did tube television service for many years in the last century Larry G
Reply With Quote