View Single Post
  #6  
Old 11-21-2016, 04:07 PM
jr_tech's Avatar
jr_tech jr_tech is offline
VideoKarma Member
 
Join Date: Sep 2009
Posts: 4,573
If the source of the hum is coupling in the amp circuit itself, you might consider adding a small solid state pre-amp at the base of the turntable, so the main amp would not have to be tutned up as far. Of course, this won't help if the source of the hum is the cartridge/tone arm... if that is the case, shielded wiring in the tone arm could help, the trick would be to find some very small flexible, lightweight coax.

jr
Reply With Quote