Quote:
Originally Posted by farmradio
It also appears that K1, & K3's description is reversed in the SAMS, because the one labeled K3 (sync coupling) has no pF capacitors, & that K1 (agc), with all resistors is not used in the 118A, & verified that by not being able to physically locate it on the board. So this has K3, (sync coupling), near the sync separator, labeled K1 in the SAMS, which in fact is most likely K3 2 pF capacitors, & 3 resistors. Help! I need an RCA original service document on this. This is nuts. After that Sentinel nightmare I just did, I've got discrepancies again in SAMS.
|
Get used to Sam's being FULL of errors...At least you probably have not had the damnit I can't undo what this piece of paper had me do moment....I've had that moment twice. Once I adjusted the wrong slug on a remote reciever cause sam's had the ones for the two channels reversed in their layout. The other time I did not know how to read the bumblebee capsand changed according to the schematic. I moved and lost the originals, and come to find the schematic and parts list are different by a factor of 10, and the vert circuit they were in was off freq....I had to redesign the resistors to make it work since I did not have the other cap value on hand, and did not have any dough.