|
You need a HV probe or HV meter. You want a HV probe good to at least 20KV (30-40KV is better especially if you plan to do color work).
I'm not sure where you came up with the notion that your probe will load it too heavily....If it is designed for 15-20KV duty it should be fine....Most HV meters TV techs used were essentially an HV probe with a volt meter tacked on... Look at the HV spec on the schematic and select a probe that can do about 5KV or more above that number.
You should be able to find a half decent CRT tester for $10-$50...I got my trusty B&K 466 for $25 working.
Compare neck voltages with schematic bearing in mind that some vary with control settings, and those settings are often noted on the schematic.
|