View Single Post
  #14  
Old 07-26-2016, 03:22 PM
DavGoodlin's Avatar
DavGoodlin DavGoodlin is offline
Motorola Minion
 
Join Date: Aug 2011
Location: near Strasburg PA
Posts: 3,505
Most series-heater (transformer-less) radios had the chassis connected to one side of the line and very few had polarized plugs, even after all the series-heater TVs had them. Often, the AC line went via the power switch right to the chassis, so adding a polarized cord without rewiring this condition was of no benefit.

Some of the higher-quality radios had the chassis connected to line or "B-" via a capacitor, .05 mf or so. The metal chassis was more of a signal ground.

The first TV repairman I worked for said the most dangerous voltage in a TV was the 120 volts AC feeding it. The 400 volts B+, boost, focus and HV would hurt but you seemed to recoil AWAY from those as discharges, causing cuts or worse from the reaction.
__________________
"When resistors increase in value, they're worthless"
-Dave G
Reply With Quote