View Single Post
  #6  
Old 07-21-2016, 04:44 PM
Eric H's Avatar
Eric H Eric H is offline
Administrator
 
Join Date: Jun 2002
Location: So. Calif
Posts: 11,565
In the second picture it's clear the horizontal frequency has gone way off and you have multiple images side by side, something may be shorting causing it to do this.

Have you tried turning the horizontal control when this happens? Sometimes you have to keep turning until it flops over and over until it gets to the right frequency where you have only one image.

If it starts out okay then goes to multiple images then something's drifting or shorting pulling the oscillator off frequency. some cold spray on the components around the oscillator tube might show it up.
Reply With Quote