View Single Post
  #26  
Old 07-20-2016, 01:40 PM
Radiotronman's Avatar
Radiotronman Radiotronman is offline
VideoKarma Member
 
Join Date: May 2015
Posts: 588
I haven't got s chance to dig out my oscilloscope, but I did take find voltage checks.

CRT
Pin 2-6 (420v) I get 470
Pin 7 (35v) I get 69v
Pin 4 (0) I get 0

6CG7 horiz mult
Pin 1 (175v) I get 190v
Pin 7 (-15v) I get -10v
Pin 6 (175v) I get 155v
Pin 8 (6.5v) I get 6-7v

My boost voltage is supposed to be 435v and is 460v

9BR7 horiz AFC/sync
Pin 8 (3.5v) I get 2v
Pin 7 (-0.5v) I get 0v
Pin 1 (55v) I get 59v
Pin 2 (-2v) I get -3v

I'm not trained in electronics but enjoy this hobby and know the basics. Do these readings throw up any flags to any of you guys? Maybe a couplate causing these issues? I've checked all of the resistors and caps I put in and do not see any errors.

Thanks
Scott
Reply With Quote