View Single Post
  #3  
Old 05-12-2016, 08:00 AM
zeno's Avatar
zeno zeno is offline
VideoKarma Member
 
Join Date: Mar 2013
Location: New Hampshire
Posts: 4,918
Almost anything lowering the HV should cause the
h. out current to go up. It can be hard to get it under spec
as it is on many sets since they are run at the edge.
Only other thing is if there is a filament resistor for the
3A3 under the socket. Meter is also suspect. Try on
a newer set thats solid state & better regulated.

73 Zeno
Reply With Quote